Roof support

The roof support is used to maintain and control the roof in horizontal and inclined workings, developed by long working faces, with a removable seam thickness of 0.75 – 3.0 m, the method of roof control is with full collapse, with partial or full backfilling of the worked-out space.

Downhole mobile scraper conveyors

Conveyors are designed to transport ore from the working faces and move shearers along them. Conveyors are part of mechanized complexes.

Heading-and-cleaning combines

The heading machine is intended for use in cleaning operations in chambers and driving oval-arched workings along potash ore seams with a thickness of 3.1 m at angles of incidence up to ± 12 ° with cutting resistance of rocks up to Ap = 450 N / mm.

Pumping stations

Pumping stations are designed to supply hydraulic systems of powered supports of treatment complexes with working fluid in mines and coal mines, including gas and dust hazardous ones.

Hydraulic and pneumatic cylinders

Hydraulic cylinders of production are used in the mining industry, in heavy engineering, in metallurgy, in lifting equipment, road construction equipment.

Mine self-propelled cars

Self-propelled mine carriage VS-17 is designed for trackless shuttle transportation of coal in mines hazardous in terms of methane gas and coal dust in mine workings with a minimum size of 3.0 m in width and 2.4 m in height.

Stowing conveyors

Stowing conveyors, mobile, single-chain are part of the vehicles of mining mechanized complexes when removing potash salt with long working faces in a selective way.

Reloading bunkers

Loading bins are part of tunneling complexes for machine mining of potash ores, consisting of combines type PKS-8M, KRP-3-660 / 1140, “Ural-10A”, “Ural61” and self-propelled cars of type VS-17, VS-17V, 5VS-15M, VS-25 and are designed to ensure continuous operation of combine complexes in automatic control mode in workings with inclination angles of ± 12 ° С.

Mobile scraper material handlers

PPS are scraper reloaders with an accumulating tank and are designed for transferring potash ore from self-propelled cars of the type VS-17, VS-17V, 5VS-15M, VS-25 to belt conveyors of the KL-600, KLSh-1-1000 type.

Cutting tool

Designed for shearers and roadheaders working on potash ores with cutting resistance up to 450 kgf / cm and abrasiveness up to 50 mg / km.

LHD machines ML-114, ML-110, ML-107

Machines of various carrying capacities are designed for loading and unloading and delivery operations with blasted or mechanically loosened rocks in the cramped conditions of underground mines and drifts outside explosive zones in the mining industry, as well as in open pit mining, tunnel construction, etc.

Mine dump truck MD-230

Mining dump truck MD-230 is a dump truck of a special design designed for carrying out transport operations in underground mine workings.
The machine is operated outside the explosive zones of underground mines and through the passage, as well as in open pit mining, tunnel construction, etc.

Scraper mobile drift conveyors

The scraper mobile drift conveyor is designed for transportation of rock mass (ore, coal, shale) in mines from working and tunneling faces to subsequent vehicles.

Crushers

Designed for mechanical crushing of oversized lumps (no more than 600 mm in size) of ore transported from the working face by the traction arm of the scraper conveyor.

Flotation machines

Flotation machines are designed to carry out the operation of separating sylvite and halite minerals by the flotation method, based on the different ability of these minerals to fix on the interface.

Hydrocyclones

The device is designed for desliming, thickening of sludge and flotation products, clarification of circulating waters, classification of ore pulp in the stages of fine grinding in a closed cycle with ball mills and enrichment of fine fractions of coal and ores in an aqueous medium and heavy suspensions in a centrifugal field.

Drying Brabans

The contact tank consists of a container and a drive with an impeller. A cylindrical container with a bottom and a lid is made of carbon or stainless steel. On the cover of the tank there is a frame, a drive stand with an impeller, an electric motor with a V-belt transmission and a guard.

Contact vats

Drying drums are designed for drying salts at sylvinite-processing plants for the production of potash mineral fertilizers.

Mixers

Twin-shaft mixers are used for mixing bulk materials. Mixers-granulators are designed for granulating dusty products with the addition of a binder and for reagent processing of bulk materials.

The SBSH 250-40 DG “Universal” rotary drilling rig with a hydraulic drive is specially designed for drilling blast holes in rocks of various strength categories and drillability classes in open pit mining.

The drilling depth is 40 m with a rod of 8.5 m. The feed pressure creates a force on the bit of 270 kN. Due to the diesel drive, the autonomy of the machine is ensured and the time for its movement is reduced, which does not depend on the re-installation of the open-pit electrical networks.

All technological processes – drilling, bit replacement, assembly and disassembly of the drill string – are mechanized and automated as much as possible.

The main parts of the machine:

• Semi-rigid caterpillar track;
• Platform;
• Driver’s cab;
• Equipment mast;
• Compressor unit;
• The block of radiators for cooling working fluids.

The scope of delivery of the machine includes:

• machine – 1 piece;
• barbell – 4 pcs.;
• set of adapters – 1 pc .;
• spare parts kit – 1 pc .;
• operational documentation.

• Drill bits
• Drill pipe
• Bailers
• Driven glasses
• Impact rods
• Impact cartridges
• Drilling augers
• Machine tools
• Perforators
• Barbells